Operation Manual – Cluster
H3C S5600 Series Ethernet Switches
Chapter 1 Cluster
1-21
III. Configuring cluster topology management function
1) Configuration
prerequisites
Before configuring the cluster topology management function, make sure that:
z
The basic cluster configuration is completed.
z
Devices in the cluster work normally.
2) Configuration
procedure
Follow these steps to configure cluster topology management function on a
management device:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter cluster view
cluster
—
Check the current
topology and save it as
the standard topology.
topology accept
{
all
[
save-to
local-flash
] |
mac-address
mac-address
|
member-id
member-id | administrator
}
Required
Save the standard
topology to the Flash
memory of the
administrative device
topology save-to
local-flash
Required
Restore the standard
topology from the Flash
memory of the
administrative device
topology restore-from
local-flash
Optional
Display the detailed
information about a single
device
display ntdp single-device
mac-address
mac-address
Display the topology of
the current cluster
display cluster
current-topology
[
mac-address mac-address1
[
to-mac-address
mac-address2
]
| member-id
member-id1
[
to-member-id
member-id2
] ]
Display the information
about the base topology
of the cluster
display cluster base-topology
[
mac-address mac-address
|
member member-id
]
Display the information
about all the devices in
the base cluster topology
display cluster base-members
Optional
These commands
can be executed in
any view.