Operation Manual – Routing Protocol
H3C S5600 Series Ethernet Switches
Chapter 3 RIP Configuration
3-8
Note:
z
The
filter-policy import
command filters the RIP routes received from neighbors,
and the routes being filtered out will neither be added to the routing table nor be
advertised to any neighbors.
z
The
filter-policy export
command filters all the routes to be advertised, including
the routes redistributed with the
import-route
command and routes learned from
neighbors.
z
You can also use the
filter-policy export
command to filter outgoing routes
redistributed from a specified routing protocol.
V. Setting RIP preference
Follow these steps to set RIP preference:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter RIP view
rip
—
Set the RIP preference
preference
value
Required
100 by default
VI. Enabling load sharing among RIP interfaces
Follow these steps to enable load sharing among RIP interfaces:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter RIP view
rip
—
Enable load sharing
among RIP interfaces
traffic-share-across-i
nterface
Required
Disabled by default
VII. Configuring RIP to redistribute routes from another protocol
Follow these steps to configure RIP to import routes from another protocol:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter RIP view
rip
—
Configure a default cost for
an incoming route
default cost value
Optional
1 by default