Operation Manual – HWPing
H3C S5600 Series Ethernet Switches
Chapter 1 HWPing Configuration
1-19
To do…
Use the command…
Remarks
Configure the type of
service
tos value
Optional
By default, the service
type is zero.
Configure the domain
name to be resolved
dns
resolve-targetdomai
domainname
Required
By default, the domain
name to be resolved by
DNS is not specified.
Configure the IP address
of the DNS server
dns-server ip-address
Required
By default, no DNS server
address is configured.
Start the test
test-enable
Required
Display test results
display hwping results
[
admin-name
operation-tag
]
Required
The
display
command
can be executed in any
view.
II. Configuring HWPing client to send Trap messages
Trap messages are generated regardless of whether the HWPing test succeeds or fails.
You can specify whether to output Trap messages by enabling/disabling Trap sending.
Follow these steps to configure the HWPing client to send Trap messages:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable the HWPing client
function
hwping-agent enable
Required
By default, the HWPing
client function is disabled.
Create a HWPing test
group and enter its view
hwping
administrator-name
operation- tag
Required
By default, no test group
is configured.
Enable the HWPing client
to send Trap messages
send-trap
{
all
|
{
probefailure
|
testcomplete
|
testfailure
}
*
}
Required
By default, Trap sending
is disabled.
Configure the number of
consecutive unsuccessful
HWPing tests before Trap
output
test-failtimes times
Optional
By default, Trap
messages are sent each
time a test fails.