Operation Manual – Routing Protocol
H3C S5600 Series Ethernet Switches
Chapter 6 IP Routing Policy Configuration
6-12
6.8.2 Controlling RIP Packet Cost to Implement Dynamic Route Backup
I. Network requirements
The required speed of convergence in the small network of a company is not high.
The network provides two services. Main and backup links are provided for each
service for the purpose of reliability. The main link of one service serves as the backup
link of the other. The two services are distinguished by IP addresses. If a fault occurs
to the main link of one service, dynamic backup can prevent service interruption.
II. Network diagram
According to the network requirements, the network topology is designed as shown in
Figure 6-2
.
Device Interface
IP
address
Switch A
Vlan-int 2
2.2.2.1/8
Vlan-int
3
3.3.3.254/8
Vlan-int
10
1.1.1.254/8
Switch B
Vlan-int 3
3.3.3.253/8
Vlan-int
6
6.6.6.5/8
Vlan-int
10
1.1.1.253/8
Switch C
Vlan-int 1
192.168.0.39/24
Vlan-int
2
2.2.2.2/8
Vlan-int
6
6.6.6.6/8
OA Server
1.1.1.1/32
Service Server
3.3.3.3/32
Host 192.168.0.9/24
Figure 6-2
Network diagram
III. Configuration considerations
z
According to the network requirements, select RIP.