manualshive.com logo in svg

H3C H3C S5600 Series, Operation Manual, Page: 1096 / 1278

Share
Download
H3C H3C S5600 Series Operation Manual Download Page 1096

Operation Manual – Information Center 
H3C S5600 Series Ethernet Switches 

Chapter 1  Information Center

 

1-9 

Task 

Remarks 

Setting to Output System Information to the Log Buffer

Optional 

Setting to Output System Information to the SNMP NMS

Optional 

 

1.2.2  Configuring Synchronous Information Output 

Synchronous information output refers to the feature that if the system information such 

as log, trap, or debugging information is output when the user is inputting commands, 

the command line prompt (in command editing mode a prompt, or a [Y/N] string in 

interaction mode) and the input information are echoed after the output. 

This feature is used in the case that your input is interrupted by a large amount of 

system output. With this feature enabled, the system echoes your previous input and 

you can continue your operations from where you were stopped. 

Follow these steps to configure synchronous information output: 

To do… 

Use the command… 

Remarks 

Enter system view 

system-view 

— 

Enable synchronous 
information output 

info-center 
synchronous

 

Required 

Disabled by default 

 

 

  Note: 

z

 

If the system information is output before you input any information following the 

current command line prompt, the system does not echo any command line prompt 

after the system information output. 

z

 

In the interaction mode, you are prompted for some information input. If the input is 

interrupted by system output, no system prompt (except the Y/N string) will be 

echoed after the output, but your input will be displayed in a new line. 

 

1.2.3  Configuring to Display the Time Stamp with the UTC Time Zone 

To add UTC time zone to the time stamp in the information center output information, 

you must: 

z

 

Set the local time zone 

z

 

Set the time stamp format in the output direction of the information center to 

date

 

z

 

Configure to add the UTC time zone to the output information 

Follow these steps to configure to display time stamp with the UTC time zone: 

Summary of Contents for H3C S5600 Series































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments