Installation Manual
H3C S5100-SI/EI Series Ethernet Switches
Chapter 3 Installing the Switch
3-15
(1)
(2)
(3)
(1) Blind nut in the dent of the switch bottom
(2) Permanent magnet
(3) M3*6 countersunk head screw
Figure 3-19
Magnet mounting
Caution:
z
Apply magnet mounting to only the above four models. Otherwise, a falloff or
mis-operation may occur.
z
Select the installation location carefully. In the case of poor interface, magnet
mounting may not be reliable.
z
Put the device at a stable place free from vibrations or shocks. Otherwise, personal
injuries or equipment damage may occur.
z
Avoid installing the device at a high place because personal injuries or equipment
damage may occur in case of a falloff.
z
Avoid frequently moving the desk-mounted device because such movements may
damage the surface coating.
z
Keep the front panel of the device facing downwards and the two sides with
ventilation holes vertical to the ground, if you want to install the device vertically.
z
Pay attention that the weight of external cables should not bring about a falloff,
which may result in personal injuries or equipment damage.
z
Keep floppy disks and magnetic cards away from magnets to avoid erasure of any
information.
z
Keep computers and monitors that are easily influenced by magnetic fields away
from magnets. Otherwise, faults may occur to these electronic devices.
