Installation Manual
H3C S5100-SI/EI Series Ethernet Switches
Chapter 1 Product Overview
1-5
(1): 10/100/1000Base-T autosensing Ethernet port status LEDs
(2): 1000Base-X SFP port status LED
(3): Console port
(4): 7-segment digitron display
(5): Power LED
(6): Ethernet port mode switching LED
(7): Port status LED mode switch
Figure 1-4
Front panel of an S5100-16P-SI Ethernet switch
II. Rear panel
(1): AC power input
(2): Grounding terminal
Figure 1-5
Rear panel of an S5100-16P-SI Ethernet switch
III. Side panel
An S5100-16P-SI Ethernet switch provides a lock hole for locking the switch to a
secure object for theft prevention.
The lock hole is on the back of the left side panel, as shown in Figure 1-3.
Note:
The lock hole cannot be used when the screw hole above it is in use.
IV. Power supply system
AC input:
Rated voltage range: 100 VAC to 240 VAC; 50 Hz or 60 Hz
Max voltage range: 90 VAC to 264 VAC; 47 Hz to 63 Hz
