H3 HUMMER 2007, Manual

Page: 103 / 124

Audio System
Preset Station Scanning
To scan preset radio stations, press
and hold either SEEK arrow for
more than four seconds. You will
hear two beeps and
PSCAN
(preset scan) will appear on the
display. The radio will go to the
first preset station stored, play for a
few seconds, then go on to the
next preset station.
The radio will not stop on stations
with weak reception.
Press it again to stop the scanning
function.
. . . 104
SETTING PRESET STATIONS
The six touch-sensitive buttons
allow you to store your six favorite
stations for each radio band.
To store a preset:
1.
Turn the audio system on.
2. Press the BAND hard key until
the desired source appears on
the display.
3.
Tune in the station.
4. Touch and hold one of the six
preset buttons until you hear a
beep .
5. If desired, press the J> (audio)
hard key to set the tone for
your preset.
See 11Audio Menu11 later in this
section for more information.
6. Repeat the steps for each
preset and source.