manualshive.com logo in svg

h/p/cosmos 190/65 3p, Original Instructions For Use

The "h/p/cosmos 190/65 3p" is a cutting-edge fitness equipment designed for ultimate performance. Enhance your workouts with this innovative product which comes with an Original Instruction manual. Easily download your free manual from manualshive.com, empowering you to maximize your training experience and achieve optimal results.

Share
Download
background image

maintenance and safety inspections 

file: n:\article\cos14310m5-v1_08hpc-en\20150130_cos14310m5-v1.08hpc-en_instructions_for_use_h-p-cosmos_treadmill.doc 

© 2015 h/p/cosmos sports & medical gmbh     author: fh     [email protected]     created 30.01.2015     printed 30.01.2015     page: 124 of 216 

 

 

 

 

 

 

 

running, cycling, cross-country, skating

 

[inline, roller ski]

  

 

Valve  cock  position  [1]  horizontally:  the  distributor  [2]  is  adjusted  for 
lubrication [3] only in the centre of the running deck [4]. 
 
The valve cock position only influences the distribution of the oil amount 
to the various oil outlets (tubes).  
The  total  oil  supply  amount  of  the  oil  -pump  always  remains  constant, 
independent of the valve cock position. 
The control lamp “Empty oil tank” on the external control unit indicates a 
nearly  empty  oil  tank.  Refill  the  oil-tank  when  the  control  lamp 
illuminates.

 

 

wheelchair

 

 

Valve  cock  position  [1]  vertically:  the  distributor  [2]  is  adjusted  for 
lubrication [3] over the entire width of the running deck [4]. 
 
The valve cock position only influences the distribution of the amount of 
oil to the various oil outlets (tubes). The total oil supply amount of the oil 
pump always remains constant, independent of the valve cock position. 
 
The control lamp “empty oil-tank” on the external control unit indicates 
that the oil tank is nearly empty. Refill the oil-tank when the control lamp 
illuminates. 

 
At standard settings the word “OIL” will flash after 1000 km of operation. If this occurs, check the oil level in the oil 
tank and refill preterm if necessary. 
Because the device does not have a sensor, the oil message will not extinguish automatically. After checking the 
oil level, the message has to be reset with “OP01“. 
 

8.4.5

 

Refilling oil tank 

 

N

 

Unplug the device and wait for one minute. 

N

 

The oil tank is located in the external control unit of the device  below at the left. (For devices constructed 
before 2002 and without external control unit, the oil-tank is located at the rear of the machine close to the 
drive engine.) 

N

 

At the saturn 450/300 treadmill, the oil-tank is located at the rear of the machine opposite to the drive engine, 
unplugging is not needed. 

N

 

Open the lid of the tank and refill the oil-tank with approximately 0.5 litres of the provided original oil, which 
can be ordered at h/p/cosmos.  For devices constructed before 2002 and without an external control unit, add 
approximately 1 to 1.5 litres) 

N

 

Close the lid of the oil-tank, plug in the power plug and switch the device on. 

N

 

Check control lamp on the external control unit. If it is no longer illuminated, the oil-tank has been sufficiently 
refilled. 

N

 

If necessary, reset the oil message with „OP 01“. 

 
h/p/cosmos treadmill size 200-300/75-125 

Summary of Contents for 190/65 3p

























































































































































































































Reviews:

No comments

Related manuals for 190/65 3p

Campbell CS500 Instruction Manual preview
CS500
Brand: Campbell Pages: 18
Vector 0 Owner'S Manual & Warranty Information preview
0
Brand: Vector Pages: 4
Nautilus HDP6D-LFHR Assembly Manual preview
HDP6D-LFHR
Brand: Nautilus Pages: 12
CAIRE SPRINT User Manual preview
SPRINT
Brand: CAIRE Pages: 16
Darco BODY ARMOR PRO TERM Instructions For Use Manual preview
BODY ARMOR PRO TERM
Brand: Darco Pages: 6
xsto DC Series Operation Manual preview
DC Series
Brand: xsto Pages: 76
F&V R-3 User Manual preview
R-3
Brand: F&V Pages: 5
F Care Systems EVRF Quick User Manual preview
EVRF
Brand: F Care Systems Pages: 2
ParaBody 801 Assembly Instruction Sheet preview
801
Brand: ParaBody Pages: 3
Valiani OMNIA Instruction And Maintenance Manual preview
OMNIA
Brand: Valiani Pages: 66
PacBio Sequel Safety Manual preview
Sequel
Brand: PacBio Pages: 13
Pablo BELMONT Assembly/Installation Instructions preview
BELMONT
Brand: Pablo Pages: 4
PA A42R-316 Manual preview
A42R-316
Brand: PA Pages: 28
Yamaha TG500 Supplementary Manual preview
TG500
Brand: Yamaha Pages: 16
Kärcher R 100 Manual preview
R 100
Brand: Kärcher Pages: 20
Parker Research Corp B200S Operating Instructions preview
B200S
Brand: Parker Research Corp Pages: 3
Qnergy PowerGen 5650 Series Installation & Commissioning preview
PowerGen 5650 Series
Brand: Qnergy Pages: 10
Össur QUICK-ALIGN Vari-Flex Instructions For Use Manual preview
QUICK-ALIGN Vari-Flex
Brand: Össur Pages: 36

Brands by name

Popular brands

Load more brands