PCS-1000 User Manual
44
Interface Configuration
Configure GPIB Interface
To use GPIB the GPIB address must first be set.
Configure GPIB
1.
Connect the GPIB cable from the GPIB
controller to the PCS-1000.
2.
Turn the PCS-1000 on.
3.
Long push
Func
key to enter the
function menu.
Page 31
4.
Use the
◄
Func
►
keys to go to the
ADDRESS
function.
5.
Select the address using the
▼
Select
▲
keys.
GPIB Address
00~30
6.
Press the
Enter
key to confirm the selection.
Note
RMT will be displayed on the screen when the unit
is remote mode.
GPIB constraints
Maximum 14 devices altogether, 20m cable
length, 2m between each device
Unique address assigned to each device
At least 2/3 of the devices turned On
No loop or parallel connection
Summary of Contents for PCS-1000
Page 52: ...PCS 1000 User Manual 52...
