OPERATION
19
Set Up
Power Up
Steps
1.
Connect the power cord to the rear panel
socket.
2.
Press the power switch.
The unit will perform a calibration data and
ROM check and then display the software
version momentarily before it is ready to be
used.
RMT
ACA
30A
Auto
mA
A
CURRENT
ACV DCV
Auto
mV
V
VOLTAGE
DCA 300A
ERROR
Note
In the event the calibration data and ROM check
fails, CAL DATA FAIL will be displayed on the
screen, as shown below. If the calibration data and
ROM check fails, return the unit to an authorized
GW Instek service center.
RMT
ACA
30A
Auto
mA
A
CURRENT
ACV DCV
Auto
mV
V
VOLTAGE
DCA 300A
ERROR
Note: The CAL DATA FAIL message will remain on
the display until it is cleared. Press any key to clear
the error message.
Summary of Contents for PCS-1000
Page 52: ...PCS 1000 User Manual 52...
