GVC KR632, User Manual, Page: 51 / 56

51
4.2.6 MAIN MENU > PERIPHERAL SETUP
These options allow you to set variable parameters for Peripheral Ports, IDE.. etc.
l
Peripheral Setup > OnBoard FDC
Set this option to Enabled to enable the floppy
drive controller on the motherboard.
l
Peripheral Setup > OnBoard Serial PortA
l
Peripheral Setup > OnBoard Serial PortB
These options specifies the base I/O port
address for Serial Port A or Serial Port B.
Serial PortB Mode specifies the mode for
Serial Port B for normal (COM2) or infrared
applications. Its three selections are
Normal(default) , IrDA and ASK-IR.
4. BIOS SETUP
Move to items
Exit to
Main Menu
Enter
Sub-Menu
Modify values
Figure 7 : PERIPHERAL SETUP
Auto ( Default )
Disabled
Enabled
Auto(Default) 3E8h/COM3
Disabled 2E8h/COM4
3F8h/COM1
2F8h/COM2