GVC KR632, User Manual, Page: 10 / 56

10
Features Of The Motherboard
The KR632 motherboard integrates the Pentium
 
II
microprocessor, memory, I/O and AGP (Accelerated
Graphics Port) and is designed to fit into a standard
ATX form factor chassis. Page 12 illustrate the Layout
for the KR632 motherboard. Below lists the key
features provided by this motherboard:
ProCache)
l
Single slot-1 for Pentium

II processor
l
Supports Pentium II processor speeds (233-333MHz)
l
512KB second-level cache integrated into the Single Edge Pentium

II Contact cartridge
Jumperless Design
l
Using the onboard BIOS, jumpers settings are no longer needed.
Chipset
l
82440LX AGP/PCI/ISA Chipset.
System Memory
l
Three 168-pin DIMM sockets
l
Minimum 8MB up to maximum 384 MB of unbuffered SDRAM or EDO RAM
l
ECC (Error Checking & Correction) or non-ECC memory support
Graphics Support
l
Supports AGP (Accelerated Graphics Port) for increased performance of Graphic
Displays, special 3D operations in multimedia, and higher speed to satisfy the users
optical vision.
l
AGP Interface supports data transfers at 66 MHz (1x) or 133 MHz (2X) with full
side-band signals.
PCI Bus Master IDE Controller
l
Integrated PCI Bus Master IDE Controller Chip with Ultra-DMA33 capabilities. Up to
four IDE devices can be supported using the two onboard IDE connectors. Also supported
is PIO Modes 3&4, Bus Master IDE DMA Mode 2 and Enhanced IDE devices such as
Tape Backup machines and CD-ROMs. Either the 5.25 inch or 3.5 inch (1.44MB or
2.88MB) floppy drives can be used without requiring an external card. Additionally,
Floppy 3 mode (Japanese standard 3.5 inch disk drive, 1.2MB) and LS-120 floppy disk
drives (3.5 inch disk drive: 120MB, 1.44MB, 720K) are also supported.
2. FEATURES