GVC KR632, User Manual, Page: 37 / 56

37
4. BIOS SETUP
u
Advanced CMOS Setup > 2 nd Boot Device
This options sets the secondary device for the boot
sequence after the AMIBIOS POST completes. It
contains 10 selections for you to choose to boot the
system from or Disabled for none.
u
Advanced CMOS Setup > 3 rd Boot Device
This options sets the third device for the initial boot
sequence after the AMIBIOS POST completes. It
contains 10 selections for you to choose to boot the
system from or Disabled for none.
u
Advanced CMOS Setup > Try Other Boot Devices
If set to “Yes”, the BIOS will try to boot from another
boot device if all previous selected boot devices fail to
boot. If “No”, the BIOS will try to boot only the selected
boot devices.
u
Advanced CMOS Setup > BootUp Num-Lock
Off to turn the Num Lock key off when the computer
boots so you can use the arrow keys on both the
numeric keypad and the keyboard.
u
Advanced CMOS Setup > Floppy Drive Swap
Set this option to “Enabled” to permit drives A and B to
be swapped.
Disabled
IDE-0 ( Default )
FLOPPY
FLOPTICAL
CDROM
Disabled
IDE-0
FLOPPY
FLOPTICAL
CDROM ( Default )
Yes( Default )
No
Off
On ( Default )
Disabled ( Default
)
Enabled