GVC KR632, User Manual, Page: 48 / 56

48
When this option is set to Enabled, multiple VGA
devices operating on different buses can receive data
from the CPU on each set of palette registers on every
video devices. Bit 5 of the command register in the PCI
device configuration space is the VGA Palette Snoop
bit (0 is disabled). For
example, if there are two
VGA devices in the computer (one PCI and one ISA) and the settings are:
VGA
Palette
Snoop Bit
Setting
Action
Disabled Data read and written by the CPU is only directed to the PCI VGA device’s
palette registers.
Enabled Data read and written by the CPU is directed to the both the PCI VGA
device’s palette registers and the ISA VGA device palette registers,
permitting the palette registers of both devices to be identical.
This option must be set to Enabled if an ISA adapter card requires VGA palette
snooping.
l
PCI / Plug and Play Setup > Allocate IRQ to PCI VGA
This assign the IRQ number for PCI VGA card.
l
PCI / Plug and Play Setup > OffBoard
PCI IDE Card
This option is used if an off-board (not integrated
on the motherboard) PCI IDE controller adapter
card is installed in the computer. You must specify
the PCI expansion slot on the motherboard where
the off-board PCI IDE controller is installed. If an
off-baord PCI IDE controller is used, the onboard
IDE controller is automatically
4. BIOS SETUP
Disabled ( Default )
Enabled
No
Yes ( Default )
Auto (Default) Slot4
Slot1 Slot5
Slot2 Slot6
Slot3