GVC KR632, User Manual, Page: 35 / 56

35
4. BIOS SETUP
u
Standard CMOS SETUP > Pri Master
u
Standard CMOS SETUP > Pri Slave
u
Standard CMOS SETUP > Sec Master
u
Standard CMOS SETUP > Sec Slave
You can select the HDD type by using 46 predefined types or enter parameters
manually by choosing the User item.
If you are using a ATAPI FLOPTICAL drive, select FLOPTICAL item or select AUTO
to have the BIIOS auto-detect the hard drives.
u
Standard CMOS SETUP > Boot Sector Virus Protection
This will enable a warning message if a virus
attempts to write to the boot sector or the
partition table of the hard disk drive. Keep in
mind that this feature not only protects the boot
sector, but the entire hard drive.
After completing the STANDARD CMOS SETUP, press the ESC key to exit to the
main menu and then press the ENTER key to enter next submenu, ADVANCED
CMOS SETUP.
1-46 : Predefined types
USER : Enter parameters manually
AUTO : Set parameters automatically on each boot ( Default )
CDROM :Use for ATAPI CDROM drives
FLOPTICAL :Use for ATAPI FLOPTICAL drives
Or press ENTER to autodetect
Disabled ( Default )
Enabled
Press to exit
to main menu Press to enter
another sub-menu