Operating Manual
General Safety Information
5/5/97
5
GENERAL SAFETY INFORMATION
The instructions in this manual must be understood and followed to insure
proper and safe operation of the equipment.
As with most mechanical equipment, certain safety precautions must be
taken when the equipment discussed in this manual is operated or serviced.
If the instructions and precautions listed throughout this manual are not
followed, severe bodily injury or damage to equipment and property may
result.
Needless to say, sufficient guidelines cannot be developed to eliminate the
need for good common sense in the use and servicing of this equipment,
and in the use and application of the products this equipment has been
designed to process. Users of this equipment must therefore, make their
own determination as to the suitability of the information contained in this
manual to their specific operation and requirements. There should be no
assumption made that the safety measures and instructions contained herein
are all-inclusive, and that other safety measures may not be required for
specific use or application.
The following safety guidelines are generally applicable to the safe and
efficient use of the equipment.
ACCEPTABLE EQUIPMENT USES
The equipment is designed for the proportioning and dispensing of two-
component urethane foam, or coating systems and some two-component
epoxy systems. Under no circumstances should any acid or corrosive
chemicals be used in the unit. Consult GUSMER if there is any doubt about
the compatibility of the system to be used in this equipment.
The electrical circuitry of this equipment is not of explosion-proof design
and, therefore, the equipment must not be used in any environment
requiring this design.
Any use of this equipment other than as indicated above constitutes misuse
unless express written approval is obtained from GUSMER.