Guilin Woodpecker Medical Instrument O-Star CURING LIGHT, Instruction Manual, Page: 8 / 23

7
Ortho 3*5, 3*10 2700-3000
Soft 5, 10, 15, 20 1000-1200
Pulse 5, 10, 15, 20 1000-1200
Check 30, 60 /
Working mode setting Press and release “M/T” button quickly to cycle to
next working mode.
Curing time setting Press and hold “M/T” button 1 second and re-
lease. Curing light will cycle to next curing time.
5.6 Quick Curing Guide: Recommended Curing Times for Optimal Results
Exposure times may need to be adjusted due to composite reactivity,
shade, distance from the light lens to the composite, and depth of
composite layer if it is over 2mm.
Mode
Normal, Soft,
Pulse
High Turbo Ortho
Per 2mm Layer 1×10 Seconds 2×3 Seconds 1×3 Seconds /
Final Cure 2×10 Seconds 2×3 Seconds 2×3 Seconds /
Ortho Metal & Ce-
ramic Brackets / 2×5 Seconds 2×3 Seconds 2 × 3 S e c -
onds
5.7 Use Point Cure Lens: The magnetic Point Cure Lens provides pinpoint
curing of small composites and is helpful for tack curing veneers and all
porcelain crowns.
For veneers, the Turbo mode with a 1-second curing time allows for point
curing the center of a veneer with the ability to then clean up the uncured excess
around the margins, then cure the entire restoration using the full-sized curing
lens.
For all porcelain crowns, place the curing light on the buccal and lingual
surfaces and point cure using Turbo mode for approximately 2 seconds each,
clean up the uncured resin around the margins, then cure the entire restoration
using the full sized lens.
5.8 Caries detection using Check mode
Select the Check mode, when purple light irradiates caries or dental plaque,
it will produce orange red fluorescence reaction to detect surface caries or dental
plaque.
WARNING: Check mode is prohibited for curing resin-based materials.
5.9 Measuring the light intensity
The integrated radiometer allows the light intensity (mW/cm 2 ) to be measured
easily and quickly while the charging base is connected.
To measure the light intensity, place the tip of the top of main unit, without