manualshive.com logo in svg

Guilin Woodpecker Medical Instrument O-Star CURING LIGHT, Instruction Manual, Page: 2 / 23

Share
Download
Guilin Woodpecker Medical Instrument O-Star CURING LIGHT Instruction Manual Download Page 2

Contant

Preface --------------------------------------------------------------------- 2

1. Introduction ------------------------------------------------------------- 2

2. Product Performance Structure and Components  ---------------- 2

3. Basic Technical Specifications  --------------------------------------- 3

4. Installation -------------------------------------------------------------- 4

5. Operation   -------------------------------------------------------------- 5

6. Precaution -------------------------------------------------------------- 9

7. Cleaning, Disinfection and Sterilization ----------------------------- 10

8. Contraindication  ------------------------------------------------------ 15

9. Daily maintenance ---------------------------------------------------- 15

10. Troubleshooting  ----------------------------------------------------- 16

11. Storage and transportation  ---------------------------------------- 17

12. After service  --------------------------------------------------------- 17

13. Environmental protection  ------------------------------------------ 17

14. Symbol instruction  -------------------------------------------------- 17

15. EMC - Declaration of conformity  ---------------------------------- 18

16. Statement ------------------------------------------------------------ 21

Summary of Contents for O-Star CURING LIGHT
























Reviews:

No comments