Guilin Woodpecker Medical Instrument O-Star CURING LIGHT, Instruction Manual, Page: 17 / 23

16
instruments, which may damage or scratch the housing surfaces.
9.3 Routinely check the lens for cured dental resins. If necessary, use a non-
diamond dental instrument to carefully remove any adhered resin.
9.4 This equipment does not include the self-maintainable spare parts.The
maintenance of this equipment should be taken by the appointed professional or
special repair shop.
9.5 Please use accessory which is designed and supplied by our company,
contract with the local dealer or our company if you want to buy. It may cause
potential dangers to curing light or other damages which is designed and
supplied by other manufacturers.
9.6 The accessory of the product should be cleaned by clean water or
sterilized liquid. Do not soak.
9.7 Please clean the resin remained on the top of the main unit after using to
avoid infecting the life-span or solidified effect.
9.8 If the main unit not used for a long time, be sure to charge the lithium
battery of the main unit every six months to prevent damage to the lithium battery
after long-term storage.
10. Troubleshooting
Faults Possible causes Solutions
No Display.
No response.
1. Battery is out of power.
2. Battery is protected.
3. Faulty of battery.
1. Charging.
2. Please put the curing light into the
pedestal for charging, then the battery
works again.
3. Please contact our special repair shop
or us.
The main
unit can't be
charged.
1. The main unit is not
properly inserted into the
charging base.
2.The adapter is not
connected well
3. The charging point is
impurity.
4. Using the wrong adapter
5. Faulty of adapter.
1. Insert the screen front of the main unit
and the screen front of the charging base
in the same direction.
2. Reconnect the adapter.
3. Clean by the alcohol.
4. Use the original adapter.
5. Please contact our special repair shop
or us.
Main unit screen
displays "Low
battery!"
Battery is out of power. Charging.
Main unit screen
displays "LED
Error!"
LED source of top of main
unit is broken.
Replace the top of main unit with a new
one, please contact our special repair
shop or us.