18
Class II equipment
Used indoor only
Follow Instructions for Use
Appliance compliance
WEEE directive
Atmospheric pressure for
storage
Temperature limitation for
storage
Humidity limitation for storage
CE marked product
Optical radiation
Mode / Time setting button, short press adjustment working mode,
long press adjustment curing time
Authorised Representative in the EUROPEAN COMMUNITY
15. EMC - Declaration of conformity
The device has been tested and homologated in accordance with EN
60601-1-2 for EMC. This does not guarantee in any way that this device will
not be effected by electromagnetic interference Avoid using the device in high
electromagnetic environment.
Guidance and manufacturer’s declaration - electromagnetic emissions
The device are intended for use in the electromagnetic environment specified
below. The customer or the user of the device should assure that it is used in
such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The device use RF energy only for its internal
function. Therefore, its RF emissions are very low
and are not likely to cause any interference in
nearby electronic equipment.
RF emissions
CISPR11
Class B
The device are suitable for used in domestic
establishment and in establishment directly
connected to a low voltage power supply network
which supplies buildings used for domestic
purposes.
Harmonic
emissions lEC
61000-3-2
Class A
Voltage
fluctuations
/ flicker
emissions lEC
61000-3-3
Complies
Summary of Contents for O-Star CURING LIGHT
Page 1: ......
Page 23: ...ZMN SM 426 V1 0 20210609 ...