27
1.
Protective function of automatic reverse is ONLY suitable for CW
mode.
2.
In REC mode, when the load value is higher than the preset torque value
if the Forward angle is greater than the Reverse angle, the file rotation
automatically changes to reverse rotation, and if the Forward angle is
less than the Reverse angle, the file rotation automatically changes to
forward rotation.
3.
This function is not applicable for CCW mode and ATR mode.
4.
If the motor handpiece battery indicator indicates a low battery capacity,
it would be insufficient to support the motor handpiece to reach the
preset torque value, which leads to improper auto-reverse function
Please charge it in time.
4.7
Motor operation
Please set operation mode, torque and speed as per the recommended
specifications of file manufacturer.
Motor alone mode
When using as motor alone mode,
the torque bar will show on the
screen.
(more information about torque
bar, please see chapter 3. 2 Screen
display )
Cautions:
Summary of Contents for Ai-Motor MotoPex
