21
The speed setting can be adjusted from 100 rpm
to1200 rpm.
Press the Adjusting button “+”/“-” to increase
or decrease the speed. Press the button for a
long time to increase or decrease the speed.
In ATR mode, speeds of 100~500rpm are
available.
In REC mode, speeds of 100~500rpm are
available.
The torque setting can be adjusted from 0.4Ncm
to 5Ncm.
Press the Adjusting button “+”/“-” to increase or
decrease the torque. . Press the button for a long
time to increase or decrease the toque.
In ATR mode, the Trigger Torque of
0.4Ncm~4.0Ncm is available.
In REC mode, the torque of 2.0Ncm~5.0Ncm
is available.
Actions that happen automatically when the file
tip reaches the point inside the canal determined
by the Flash Bar setting.
This action is due to the integration of the
working length determination function, when the
file reaches the reference point, the motor will
respond according to the setting, it can either be
Reverse /Stop or OFF.
Press the Adjusting button “+”/“-” to change.
OFF: It disables the apical Action function, and
the file rotates as usual even on reaching the
reference point.
Stop: The rotation stops automatically when the
file reaches the reference point, if moved away
from the reference point the file rotates again.
Reverse: The file automatically rotates in
reverse motion when it reaches the reference
point, if moved away from the reference point
the file rotates again in the forward motion.
Summary of Contents for Ai-Motor MotoPex
