Gude Expert Power Control 1202, Manual, Page: 8 / 93

8
Expert Power Control 1202/1292 © 2018 Gude Analog- und Digitalsysteme GmbH
Device Description
·
Status and Power-up delay (0...9999 seconds) adjustable individually for each Power
Port after power blackout
· Simultaneous power-up of multiple Power Ports prevented by latency time of 1
second
·
Programmable turn-on/turn-off sequence
· 4-channel watchdog, an individual watchdog (ICMP/TCP) can be assigned for each
Power Port
·
Metering of energy, current, power factor, phase angle, frequency, voltage and act-
ive/apparent/reactive power
· Two energy meters, one meters continously, the other energy meter is resettable
·
A clearly visible LED display on the device reveals total current, IP address, sensor
data and error reports
· Interface for optional sensors for environmental monitoring (temperature and humid-
ity)
·
Integrated overvoltage protection prevents damage of device and of connected con-
sumers (L-N 10 kA)
·
Dedicated high-inrush relays avoid welding of relay contacts at start-up peaks
·
Firmware update via Ethernet during operation
·
Comfortable configuration by web browser, Windows or Linux tool
·
Generation of messages (e-mail, Syslog and SNMP traps) and relay switching de-
pending on the energy measurement limits, resp. external sensors
·
IPv6 ready
·
HTTP/HTTPS, e-mail (SSL, STARTTLS), DHCP, Syslog
·
SNMPv1, v2c, v3 (Get/Traps)
·
Modbus TCP Support
·
Console Commands with telnet support and serial interface.
· TLS 1.0, 1.1, 1.2
· IP Access Control List
· Secure login over SSL
·
Low internal power consumption
·
Developed and manufactured in Germany
Only Expert Power Control 1292 :
·
4 Power Ports individually switchable via voicecall, SMS and Datacall
·
GSM admin and user access for all Power Ports definable
· For pre-paid and post-paid SIM cards (SIM card not included)
· Triband network
·
FreeCall: Predefined action upon toll-free incoming call from a specific number