22
Expert Power Control 1202/1292
© 2018 Gude Analog- und Digitalsysteme GmbH
Operating
2) or
·
Remove and connect the power supply without operating a button
3) by Software:
·
Start the "GBL_Conf.exe" application
·
Do a network search with the "Search" menu action
·
In menu
"
Program Device
"
activate the item "Enter Firmware"
Factory Reset
If the device is in bootloader mode, it can always be put back to its factory default. All
TCP/IP settings are reset in this operation.
If a unit is set to factory defaults, an uploaded certificate or updated firmware will
be preserved.
1) via push button:
·
Activate the Bootloader Mode of the device
·
Hold down the button (or the "Select" button for devices with 2 buttons) for 6
seconds. If the push button is recessed, use a pin or paper clip
·
The status LED will blink in a fast rhythm, please wait until the LED blinks slowly
(about 5 seconds)
2) by Software:
·
Activate the Bootloader Mode of the device
·
"Start the GBL_Conf.exe" program
·
In menu "Program Device
"
activate the item
"Reset to Fab Settings"
·
The status LED will blink in a fast rhythm, please wait until the LED blinks slowly
(about 5 seconds)
2.4
GSM
To use the GSM functions, there must be an activated SIM card in the SIM card slot.
If the SIM card is inserted, and the device is enabled, the integrated GSM module
searches automatically for a connection to the GSM network. If this connection works,
you can control and configure the device via SMS or by call.
When operating via SMS, send defined SMS commands to the device. The device ex-
ecutes these commands and confirms them with reply SMS.
When operating via phone call, you can perform commands by FreeCall, that allow the
unit to perform preconfigured commands, when it is called from a particular phone
number. There is no connection established and there are no call charges. Another
possibility is the voice call. Here, the device menu is operated using DTMF codes. This
type of operation can also be carried out automatically.
Preparing for GSM operation
If you are using a new SIM card, please take note:
Summary of Contents for Expert Power Control 1202
