Gude Expert Power Control 1202, Manual, Page: 7 / 93

7
Expert Power Control 1202/1292 © 2018 Gude Analog- und Digitalsysteme GmbH
Device Description
1 Device Description
1.1 Security Advice
·
The device must be installed only by qualified personnel according to the following
installation and operating instructions.
·
The manufacturer does not accept responsibility in case of improper use of the
device and particularly any use of equipment that may cause personal injury or ma-
terial damage.
·
The device contains no user-maintenable parts. All maintenance has to be per-
formed by factory trained service personnel.
· This device contains potentially hazardous voltages and should not be opened or
disassembled.
· The device can be connected only to 230V AC (50Hz or 60 Hz) power supply sock-
ets.
·
The power cords, plugs and sockets have to be in good condition. Always connect
the device to properly grounded power sockets.
·
The device is intended for indoor use only. Do NOT install them in an area where ex-
cessive moisture or heat is present.
· Because of safety and approval issues it is not allowed to modify the device without
our permission.
·
The device is NOT a toy. It has to be used or stored out or range of children.
·
Care about packaging material. Plastics has to be stored out of range of children.
Please recycle the packaging materials.
·
In case of further questions, about installation, operation or usage of the device,
which are not clear after reading the manual, please do not hesitate to ask our sup-
port team.
·
Please, never leave connected equipment unattended, that can cause damage.
·
Connect only electrical devices that do not have limited on-time. I.e. in case of fail-
ure, all connected appliances have to cope with a continuous on-time without caus-
ing damage.
1.2 Content of Delivery
The package includes:
·
Expert Power Control 1202 / 1292
·
GSM Antenna ( only EPC 1292 )
·
Quick Start Guide
· CD-ROM with Manual and Softwaretools
1.3 Description
The Expert Power Control 1202 / 1292 can switch 4 different load outputs. The
device has the following features:
·
4 Power Ports individually switchable directly on the device, via HTTP(S), SNMP
·
Case allows mounting in 19 inch racks