Gude Expert Power Control 1202, Manual, Page: 48 / 93

48
Expert Power Control 1202/1292 © 2018 Gude Analog- und Digitalsysteme GmbH
Configuration
3.4 Sensors
Sensor: Selects a type of sensor to configure it. The first digit "1" indicates the number
of the sensor port (only important for devices with more than one sensor port). This is
followed by the sensor name, and the changeable sensor name.
Sensor Name: Changeable name for this sensor. Temperature and humidity can have
different names, even if they are from the same sensor.
Select Sensor Field: Selects a data channel from a sensor.
Enable ... Messages: Enables the generation of sensor messages.
Maximum/Minimum value: Here you can choose whether, and at what Maximum/Min-
imum temperature or humidity measurements limits the alerts are send via SNMP
traps, syslog or e-mail.
Hysteresis: This describes the margin of when an event is generated after the meas-
ured value has crossed the chosen limit.
Message channels: Enables the generation of messages on different channels. If you
activate SMS messages, several recipients can be selected from the phonebook (
only
EPC 1292 ). On this example screenshot the recipients "Paul" and "Mary" are enabled,
SMS sending for "Peter" is disabled.
Min/Max measurement period: Selects the time range for the sensor min/max values
on the overview web page.