Gude Expert Power Control 1202, Manual, Page: 73 / 93

73
Expert Power Control 1202/1292 © 2018 Gude Analog- und Digitalsysteme GmbH
Specifications
set <off=0/on=1>
radius {PRIMARY=0|SECONDARY=1} enabled
show
show if radius client enabled
radius {PRIMARY=0|SECONDARY=1} server set
"<dns_name>"
sets radius server address
radius {PRIMARY=0|SECONDARY=1} server
show
shows radius server address
radius {PRIMARY=0|SECONDARY=1} password
set "{passwd}"
sets radius server shared secret
radius {PRIMARY=0|SECONDARY=1} password
hash set "{passwd}"
sets radius server crypted shared secret
radius {PRIMARY=0|SECONDARY=1} auth
timeout set {num_secs}
sets server request timeout
radius {PRIMARY=0|SECONDARY=1} auth
timeout show
shows server request timeout
radius {PRIMARY=0|SECONDARY=1} retries set
{num}
sets server number of retries
radius {PRIMARY=0|SECONDARY=1} retries
show
shows server number of retries
radius chap enabled set <off=0/on=1> enables CHAP
radius chap enabled show shows if CHAP is enabled
radius message auth set <off=0/on=1> enables request message authentication
radius message auth show
shows if request message authentication is en-
abled
radius default timeout set {num_secs}
sets default session timeout (when not returned as
Session-Timout Attribute)
radius default timeout show shows default session timeout
snmp enters cmd group "snmp"
snmp port set {ip_port} sets SNMP UDP port
snmp port show shows SNMP UDP port
snmp snmpget enabled set {OFF=0|ON=1} enables SNMP GET cmds on/off
snmp snmpget enabled show show if SNMP GET cmds are enabled
snmp snmpset enabled set {OFF=0|ON=1} enables SNMP SET cmds on/off
snmp snmpset enabled show show if SNMP SET cmds are enabled
snmp snmpv2 enabled set {OFF=0|ON=1} enables SNMP v2 on/off
snmp snmpv2 enabled show show if SNMP v2 is enabled
snmp snmpv2 public set "{text}" enables SNMP v3 on/off
snmp snmpv2 public show show if SNMP v3 isenabled
snmp snmpv2 private set "{text}" sets SNMP v2 public cummnity
snmp snmpv2 private show shows SNMP v2 public community
snmp snmpv3 enabled set {OFF=0|ON=1} sets SNMP v2 private community
snmp snmpv3 enabled show shows SNMP v2 private community
snmp snmpv3 username set "{text}" sets SNMP v3 username
snmp snmpv3 username show shows SNMP v3 username
snmp snmpv3 authalg set {NONE=0|MD5=1|
SHA1=2|SHA256=3|SHA384=4|SHA512=5}
sets SNMP v3 authentication
snmp snmpv3 authalg show show SNMP v3 authentication algorithm
snmp snmpv3 privalg set {NONE=0|DES=1|
3DES=2|AES128=3|AES192=4|AES256=5|
AES192*=6|AES256*=7}
sets SNMP v3 privacy algorithm
snmp snmpv3 privalg show show SNMP v3 privacy algorithm
snmp snmpv3 authpasswd set "{passwd}" sets SNMP v3 authentication password
snmp snmpv3 privpasswd set "{passwd}" sets SNMP v3 privacy password
snmp snmpv3 authpasswd hash set "{passwd}" sets SNMP v3 authentication hashed password
snmp snmpv3 privpasswd hash set "{passwd}" sets SNMP v3 privacy hashed password
snmp trap type set {NONE=0|V1=1|V2=2|V3=3} sets type of SNMP traps
snmp trap type show show SNMP trap type
snmp trap receiver {trap_num} set "{dns_name}"
sets address and port of SNMP trap receiver
{trap_num}
snmp trap receiver {trap_num} show
show address and port of SNMP trap receiver
{trap_num}
syslog enters cmd group "syslog"
syslog enabled set {OFF=0|ON=1} enables syslog msgs on/off
syslog enabled show show if syslog enabled
syslog server set "{dns_name}" sets address of syslog server
syslog server show shows address of syslog server
system enters cmd group "system"
system restart restarts device
system fabsettings restore fab settings and restart device
system bootloader enters bootloader mode
system flushdns flush DNS cache
system uptime number of seconds the device is running
system panel enabled set {OFF=0|ON=1} blocks panel buttons when not enabled
system panel enabled show shows if panel buttons are enabled