Prohibitions:
No pulling the cable!
Not to be used when raining!
Not for persons with artificial
pacemaker!
Warning:
Warning/Caution!
Warning against dangerous
voltage!
Warning against radioactive
materials and ionising
radiation!
Warning against poison
gases!
Warning against risk of burn
as a result of high
temperatures.
Commands:
Please read the Operating
Instructions before any
servicing
Wear protective glasses
Use safety gloves
Environment protection:
Dispose waste professionally
so as not harm the
environment.
Packing cardboard material
may be delivered to
collecting centres for
recycling.
Any defective and/or disposed
electric or electronic devices
must be delivered to
respective collection centres.
Interseroh-Recycling
Package:
Protect against moisture
Fragile This side up
Technical specifications:
Connection
~
frequency
Minimum protection
Regulated area
Recommended material
thickness
Electrode thickness
Weight
Can be used in working
conditions with increased risk
of electric shock
Single-phase alternating
current supply and rated
power symbol
WIG welding technology
Shielded metal arc welding
with wrapped bar electrode
Explanation of symbols:
EN 60974-1/A3:
2005
European welding standard
Serial No.
Must be given for all questions
MMA
Wrapped electrode welding
WIG
WIG welding in protective
atmosphere
U
0
Idle voltage
U
2
Welding voltage
X
Relative time of activation.
Relation between the time of
loading/total working time. This
applies to the working time cycle of
10 minutes.
A relative time of activation of 60%
for example means that 6 minutes of
loading must be followed by 4
minutes of idle run.
I
Welding current
U
Secondary voltage with welding
current 12
U1
Nominal input voltage (alternating
current; tolerance
±
10%)
I
1max
Maximum nominal input current
I
1eff
Maximum effective input current
1
~
50/60Hz
60Hz single-phase voltage 50 or 60
Hz
I1
Absorbed current at corresponding
welding current 12. Divide the I1
value with 1.6 for power supply for
WIG welding.
IP21S
Metal frame protection class
S
Suitable for works in high-risk areas
11