GÜDE Expert Sensor Box 7213, Manual

Page: 15 / 100

15
Expert Sensor Box 7213/7214 © 2022 GUDE Systems GmbH
Operating
The Port icon is green when the relay is closed, or red in the open state. An additional
small clock icon indicates that a timer is active. Timer can be activated by delay, reset
or batch mode.
An activated Watchdog is represented by an eye icon. An "X" means, that the address
that should be observed, could not be resolved. Two circular arrows show a booting
status.
The port can be switched manually with the "On" and "Off" buttons. If the port is turned
on, it can be turned off by pressing the "Reset" button, until after a delay it turns itself on
again. The delay time is determined by the parameter Reset Duration, which is de-
scribed in the chapter "Configuration - Output Ports
". The "Close" button dissolves
the panel again.
Batchmode
The port can be set for a selectable period of time to the state "switch on" or "switch
off". After the selected time it is automatically switched to the second preselected state.
Optionally the device can be switched via a Perl script or external tools like wget. More
information is available on our support wiki at www.gude.info/wiki.
The web page contains a status overview of the passive signal input, the time since the
last change, and a counter of the switching cycles. The name and text for a logical state
of the input is configured in the chapter Configuration-Input Ports
.
24
27