GÜDE Expert Sensor Box 7213, Manual

Page: 64 / 100

64
Expert Sensor Box 7213/7214 © 2022 GUDE Systems GmbH
Specifications
4.8 Console
For the configuration and control of the device, there is a set of commands with paramet-
ers that can be entered through a console. The console is available via Telnet, or for
devices with RS232 port through using a serial terminal. It is not necessary to use Tel-
net, in
Raw Mode a simple TCP/IP connection is sufficient to send commands. The
communication can also be performed automated (e.g. via scripting languages). The
console features are configured through the web interface
.
Command Set
There are several command levels. The following commands are usable from each level:
back go back one level
help all commands of the actual level
help all show all commands
logout logout (only when login required)
quit quit console
The "help" command returns all the commands of the current level. If "help" is called
from the top level, e.g. the line "http [subtopics]" appears. This means that there is an-
other level for "http". With the command "http help" all commands below "http" are
shown. Alternatively, with entering "http" you can select the http level, and "help" shows
all the commands on the selected level. The command "back" again selects the top
level. It is possible to use "help" at any position: "http passwd help" provides all com-
mands that have the prefix "http passwd".
You will find a complete list of all possible device commands in the chapter "Cmd Over-
view".
Parameter
If parameters are expected for the command, the parameter may be passed as numeric
or constant. If e.g. you get the following line as help:
http server set {http_both=0|https_only=1|http_only=2}
the following instruction pairs are equivalent:
http server set https_only
http server set 1
or
http server set https_both
http server set 0
Numerical parameters can be entered with different bases. Here is an example of the
decimal value 11:
Base Input
32