GÜDE Expert Sensor Box 7213, Manual

Page: 66 / 100

66
Expert Sensor Box 7213/7214 © 2022 GUDE Systems GmbH
Specifications
tents of a line is ignored.
Telnet
If the configuration "Raw Mode" is turned off, it is tried to negotiate the Telnet configura-
tion between client and server using IAC commands. If this fails, the editing functions are
not active, and the "Activate echo" option determines whether the characters sent to the
Telnet server will be returned. Normally the client begins with the IAC negotiation. If this
is not the case with the client, the device configuration "Active negotiation" should be
turned on.
Raw Mode
If you want to use the console only automated, it may be advantageous to set the con-
figuration "Raw mode" to "yes" and "Activate echo" to "no" to. Then there is no interfer-
ing interaction with the editor functions and the is no need to filter the sent characters to
process the return values.
If in the console "Raw mode" is activated but not in the used Telnet client, the IAC
commands sent at the beginning can appear as interfering characters in the command
line (partially invisible).
Editing
The following edit functions are available when the terminal supports VT100, and Raw
Mode is deactivated. Entered characters are inserted at the cursor position.
Keys Function
Left, Right moves cursor left or right
Pos1, End moves cursor to the beginning or end of line
Del deletes character under the cursor
Backspace deletes character left of cursor
Up, Down shows input lines history
Tab, Ctrl-Tab completes the word at cursor
Ctrl-C clears the line
Sensor Examples
a) External Sensors
>extsensor all show
E=1,L="7106",0="21.3°C",1="35.1%",3="1013hPa",4="5.2°C",5="16.0°C""
E=2,L="7102",0="21.2°C",1="35.4%",4="5.3°C",5="15.9°C""
The command lists one connected external sensor per line, and the individual measured
values are separated by commas after the label name. The digit before the equal sign
corresponds to the Index field in the External Sensor Table.
>extsensor 1 0 value show