GST200-2 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 10
SYSTEM:
System set-up key, used for setting system time, modifying operator
password and manager password, setting network system, setting beginning zone
number, setting output mode, system initialization and viewing supervisory data of
addressable devices. This key requires manager password.
ENTER:
Confirming inputs to be valid. In normal standby state, pressing it can
make the clock display change between month/day mode and hour/minute mode.
ESC:
For c
anceling or exiting the operating menu. If it’s pressed when the FACP is
displaying messages, it will resume to display messages of the highest level.
TAB:
For
shifting to display different messages or
moving the cursor when entering
text.
,
:
For moving the cursor up or down.
*:
For entering the wild card “*” representing numbers 0
～
9.
0
～
9:
For entering numbers.
3.1.4 Zone Indication and Manual Interventional Panel (ZCP)
Appearance of the ZCP is shown in Fig. 3-4.
Fig. 3-4
On the ZCP, each unit consists of a key, two indicators and a label. The key is for
start/stop control. Device labels can be stuck on the right side of the keys, and the user
can put the corresponding names on them. Zone indication and manual intervention
panel can complete the following functions through defining.
3.1.4.1 Zone Indication
LEDs
Fire:
Red. It illuminates when a fire occurs in a zone. It goes out after the FACP is
reset.
Fault/Disable:
Yellow. It flashes when there is any fault with the zone. If all devices
in this zone have been disabled, the LED illuminates steadily. It goes out after the
fault conditions are cleared or the FACP is reset.
Summary of Contents for GST200-2
Page 1: ......