GST GST-M200, Installation And Operation Manual, Page: 32 / 51

GST-M200 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 29
(including
“*”) are entered. Changing of an existing “+” to “&” can be done by pressing
+ 0 and inputting
“&”.

Input of
“ ＋ ”: Press + 0 and input ”+”.

Input of
“ ＝ ”: Press + 0 and input “ ＝ ”.

To modify an E&C equation, move the cursor to the modifying position by pressing
△
＝
and
＝
▽
.
Note:
“&”, “+”, and “=” can only be activated after 8 digits (including “*”) have been input.
3.4.4.2 Edit E&C
Selecting
“1. Edit E&C” in the screen shown in Fig. 3-14, the FACP enters the screen of
editing E&C, as shown in Fig. 3-15.
Fig. 3-15
3.4.4.3 Delete E&C
Selecting
“2. Delete E&C” in the screen shown in Fig. 3-14, the FACP enters the screen of
deleting existing E&C, as in Fig. 3-16.
Fig. 3-16
Pressing ENTER can delete the E&C equation. Pressing ESC , the E&C will not be deleted,
and you can select the number of other E&C to delete.
Edit E&C Number: 001
00100101&00100201
＋
00100101&00100301
＝
00100441
ESC
Delete E&C NO: 001
00100101&00100201
＋
00100101&00100301
＝
00100441
Delete Event & Command
E&C total
：
06
E&C number
：
02