GST-M200 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 21
Selecting
“3. Password Change” by entering “3” to set system password.
Selecting
“4. Timers” by entering “4” to set delay time of PAS.
Selecting
“5. Defined SLC Type” by entering “5” to define device type of the SLC
devices.
Selecting
“6. My Words” by entering “6” to define text messages.
3.4.1.1 Clear Program
Select
“1. Clear Program” in the screen shown in Fig. 3-3. By entering a fixed password
19491001, the system can be restored to factory default, as in Fig. 3-4.
Fig. 3-4
Note:
In the above example,
“GST” is the contents of the banner.
3.4.1.2 Banner
The contents of the banner are user-definable by selecting
“2. Banner” in the screen of Fig.
3-3, the LCD will display the screen in Fig. 3-5.
Fig. 3-5
At most 18 characters can be entered for the text of the banner. Please refer to Section
3.1 for detailed instructions.
3.4.1.3 Password Change
Selecting
“3. Password Change” in the screen of Fig. 3-3 can set system password. The
following screen will appear:
GST
16/09-09 V***
Please input password
********
*Banner Setting*
Please Input
T [GST ]
Software
version
Summary of Contents for GST-M200
Page 1: ......