manualshive.com logo in svg

GST GST-M200, Installation And Operation Manual, Page: 28 / 51

Share
Download
GST GST-M200 Installation And Operation Manual Download Page 28

 

GST-M200 Intelligent Fire Alarm Control Panel

   

                           

                                                         

                                 

Installation and Operation Manual

                                                 

             

                                                                                                   

             

 

 

Page 25 

3.4.3 Point Edit 

3.4.3.1  Function 

The 

“Point  Edit”  option  allows  the  operator  to  define  the  address,  type,  location,  zone 

number  of  a  device.  With  these  information  defined,  the  operator  can  quickly  find  the 

alarm zone and take timely measures in case of fire or trouble.   

3.4.3.2  Basic Steps for Device Definition 

Selecting 

“2. Point Edit” in the screen in Fig. 3-2, the LCD will display the following:   

 

 

 

 

 

 

 

 

Fig. 3-13 

1. Defining detectors 

  First  input  detector  code,  then  press 

Enter

,  the  display  will  indicate  to  input  zone 

information. 

  Input the zone number. 

  Press 

TAB

  to  move  the  cursor  to  device  type  area  and  select  the  type  (such  as 

SMOKE (ION) as shown in Table 3-1). Note: If a detector is selected to be a SUPERV 

DUCTP  type,  it  will  function  like  a  supervisory  point  when  it  senses  smoke.  The 

Supervisory LED and supervisory relay will be activated. 

  Press 

TAB

 to move to device description area, and input the text for describing the 

device (32 characters at most). Please refer to Section 3.1 for how to edit the text. 

  Press 

ENTER

, the state of Walk Test and PAS for this device will appear at the lower 

part of the screen, of which 

“0” means OFF and “1” means ON. 

 

Walk Test 

The walk test feature allows one person to test the system without manually resetting 

the  control  panel  after  activation  of  a  device.  To  enable  a  device  for  the  walk  test 

feature, input number 

“1”, the display is “ON”; To disable the walk test feature, input 

number 

“0”, the display changes to “OFF”. 

 

Positive Alarm Sequence (PAS) 

The Positive Alarm Sequence (PAS) option will program the detector to delay panel 

activation  (including  alarm  relay)  for  a  period  of  15  seconds  plus  a  programmable 

time of up to 3 minutes. To enable a device for the PAS feature, input number 

“1”, the 

display changes to 

“ON”; To disable the PAS feature, input number “0”, the display 

changes  to 

“OFF”.  Please  refer  to  Section  4.9  for  detailed  operation  procedure  of 

Code: 005        @ Zone: 001 
Type: 01 SMOKE (ION) 
1 [ Floor1 Office1                                                         

] 

Walk Test:--------------------1 ON 

PAS:---------------------------0 OFF 

Summary of Contents for GST-M200




















































Reviews:

No comments