SET-DOP xxxxxxxx
@ x= 1 or 0, 1 = Relay On, 0 = Relay Off
@ SMS command from mobile to set the Relays' out
to be On or Off
@ The relay 8 is the alarm relay. Relay 8 will
be On when alarm ( High value alarm. Low
value alarm, Input switch alarm ) happened. If
the alarm message stop, the relay 8 will Off.
Relay 8 can not be controlled by key buttons or
mobile SMS no matter set the relay 8 status to
" 1 " or " 0 ".
@ For example, SET-DOP 11000000 ( or 11000001 )
The Relay 1, Relay 2 will be On, Relay 3 to Relay 7 will
be Off. On/Off of RELAY 8 is depend on the alarm status.
@ For example, After mobile send the SMS
( SET-DOP 11111111x ) to the system, the mobile will
get the SMS confirmation from the system back as :
OP(1-8)=
Relay 1-8 On or Off
HHHHHHHL
H=Relay ON, L=Relay Off
IP(1-8)=
Input Switch Close or Open
OOOOOOOO
O=Open, C=Close
CHAM(1-8)=
Analog alarm enable/disable
00000000
0=disable, 1=enable
IPAM(1-8)=
Input switch alarm
00000000
enable/disable
0=disable, 1=enable
23
