GET-STATE
@ SMS command from mobile to get the follwoing
information :
OP :
Relay On/Off
IP :
Switch input Close/Open
CHAM :
Channel alarm ( 4-20 mA input alarm ) enable/disable
IPAM :
Input switch alarm enable/disable
After mobile send the SMS ( GET-STATE ) to the
system, the mobile will get the SMS confirmation from
the system back as :
For example :
OP(1-8)=
Relay 1-8 On or Off
HHHHHHHL
H=Relay ON, L=Relay Off
IP(1-8)=
Input Switch Close or Open
OOOOOOOO
O=Open, C=Close
CHAM(1-8)=
Analog alarm enable/disable
00000000
0=disable, 1=enable
IPAM(1-8)=
Input switch alarm
11000000
enable/disable
0=disable, 1=enable
27