b.
IPA :xxxxxxxx
IP ALARM enable/disble SETTING SCREEN
Enable :
@ It is to set if the input switch alarm enable/disable.
1= alarm enable
0= alarm disable
@ For example, setting " Enable : 11100000 " will
engage the Switch 1 to Switch 3 to alarm enable,
Switch 4 to Switch 8 is alarm disable.
* Under the above a, b. setting function, use the buttons
4-9, Fig. 1 ) to select the desired value ( 0 or 1 ).
* After finish to key in the desired no., should key in
the " ENTER " key.
* Before finish the e" IO " setting, it should press
" SETUP Button " to return SETUP SCREEN :
1:AD 2:IO 3: TEL
SETUP SCREEN
4:RP 5:IM 6:SAVE
Then key in " 6 " ( SAVE ), LCD will show :
Save OK!
SETUP->Exit
16
