SET-CH-ALARM xxxxxxxx
@ SMS command from mobile to set Analog
( 4-20 mA Analog input ) alarm status is enable
or disable.
@ x = 1 Analog alarm enable, x = 0 Analog alarm disable
@ For example, SET-CH-ALARM 11000000
The CH1, CH2 will be alarm enable, CH3 to CH8 will
be alarm disable
After mobile send the SMS ( SET-DIP-alarm xxxxxxxx )
to the system. The mobile will get the confirmation
SMS from the system back as :
For example :
If mobile send the SMS ( SET-DIP-ALARM 11000000 )
The mobile will get the SMS confirmation from the
system back similiar as :
OP(1-8)=
Relay 1-8 On or Off
HHHHHHHL
H=Relay ON, L=Relay Off
IP(1-8)=
Input Switch Close or Open
OOOOOOOO
O=Open, C=Close
CHAM(1-8)=
Analog alarm enable/disable
11000000
0=disable, 1=enable
IPAM(1-8)=
Input switch alarm
00000000
enable/disable
0=disable, 1=enable
25
