h
CH8=>xxxxxx xxx
Regular SCREEN ( CH8 )
LO:xxxx H:xxxx
CH8 Analog input, High/Low/Normal value
@ If the CHx => flashed, it indicate that the channel x
already send the " Analog alarm " SMS out.
i
CH=>12345678
Regular SCREEN ( Relay On/Off )
OP=>HHHHHHHL
H=Relay On, L=Relay Off
j
CH=>12345678
Regular SCREEN
IP=>OOOOCCCC
( Input switch, Open/Close )
O=Open, C=Close
@ If the " C" or " O " flashed, it indicate that the channel x
already send the " Switch input alarm " SMS out.
k
CH=>12345678
Regular SCREEN
CHA=>00000000
( Analog alarm, enable/enable )
0= Analog alarm disable
1= Analog alarm enable
l
CH=>12345678
Regular SCREEN
IPA=>00000000
( Input switch alarm, enable/disable )
0= Analog alarm disable
1= Analog alarm enable
m
CH=>12345678
Regular SCREEN
CHS=>HHLLLLNN
( Analog High/Low/Normal value Status )
H=High value, L=Low value, N=Normal value
32
