GSi GrainVue, Installation Manual

Page: 43 / 58

6
Connecting the T/RH Cables
Topics Covered in this Chapter
▪ Cable Installations
▪ Cable Positions
▪ OPTION 1: Single Cable Connection
▪ OPTION 2: Installing and Connecting the Mux Whip
▪ OPTION 3: Installing and Connecting the Mux Box
Cable Installations
A T/RH Cable layout illustration is provided as Figure 8-3, page 53 in Appendix-C: Cable Connection
Ports, page 53 .
1. If new T/RH Cables are being installed in the bin, refer to Figure 8-3, page 53 for the designated
cable installation locations. When installing the T/RH cables in their designated locations, refer to
the cable manufacturer’s installation instructions.
2. If only pre-existing T/RH Cables are being connected to the Cable Monitoring system, Figure 8-3,
page 53 in Appendix-C: Cable Connection Ports, page 53 will match the existing layout and should
be referenced in the Cable Positions section below.
Cable Positions
After completing any one of the cable connections options, fill out Table 8-1, page 54 in Appendix-D:
Cable Reference Details, page 54 . When filling out this table, refer to Figure 8-3, page 53 in Appendix-C:
Cable Connection Ports, page 53 for the appropriate cable reference numbers.
PNEG-2347 Cable Monitoring System 43