20
Programming with the user guide
and manual data entry, variant 2
❒
Preparation
Switch the TV set on.
Select the AV programme position for the video
recorder at the TV set.
w
!
If the recorder is connected to a TV set with Mega-
logic functions, the TV set is switched on automati-
cally, and the AV programme position is selected
automatically, when the
h
button is pressed.
Insert a cassette with sufficient playing time. Pay
attention to erase protection.
w
!
The time and date at the recorder must be correct.
❒
Example
w
!
Operation can be terminated at any time using the
A
button.
Call up the » Info « table using the
h
button.
Activate record programming using the
G
but-
ton.
– The » Record Programming « table appears.
– The data is indicated on the TV screen and in the
display on the recorder.
w
!
If all TIMER positions are occupied you must erase
a TIMER position. See the chapter “Erasing an
occupied TIMER position” on page 19.
w
!
Only the on screen display is described in the
example.
w
!
If the first TIMER position is occupied, use the
DC
buttons to select the next free TIMER position.
PROG DAT
START STOP
>
– – – – – –
– – : – – – – : – –
– – – – – – – – – – – – – – – – – – –
po
CLEAR
OK
i
2
1
3
2
1
Programme a new recording. To do this press the
G
button.
– The following appear in the data line:
a TV station, the current date, the current time as
start time, the current time plus 1 hour 30 minu-
tes as stop time, and VPS on (
*
).
Alter data for recording:
B
PROG.
– the TV station,
B
DAY
– the date,
B
START
– the start time,
B
STOP
– the stop time,
Z
VPS (red)
– VPS signal on/of,
Z
ED/EW (green)
– daily or weekly recording at the
same time.
w
!
If the picture/sound signal of an external unit, which
is connected to the corresponding sockets, is to be
recorded instead of a TV station, this programme
source must be selected using the
B
PROG.
button.
The following appears in the data line instead of the
programme number and the station identification:
» A 1 « or » A 2 «, for example for a satellite receiver at
socket EXT. 1 or EXT.2.
Confirm programming using the
G
button.
– The TIMER position is programmed. The remai-
ning playing time is indicated briefly.
– Display on Recorder: » TIMER «.
w
!
The recorder is in record stand-by mode. All drive
mechanism functions of the recorder are now
“blocked”.
w
!
The recorder “messages” and their meaning, as
well as options for alteration can be found on
page 19.
5
4
PROG
DAT
START STOP
10 CNN 01.
15:00 16:30
– – – – – – – – – – – – – – – – – – –
RED: VPS/PDC GREEN: ED/EW
+/-
CLEAR
OK
i
3
TIMER
Recording
