GV470S…
Allgemeiner T
eil / General
GRUNDIG
Servicetechnik
1 - 53
Press these buttons on the
remote control
You will see this on your TV screen
Explanations
6.1 Record Programming
with VPT-Programming
8. Confirming the TV station
O
Timer 1 is completely programmed.
The data from the TV station are stored
in the first TIMER position.
The recorder is in Ready mode, and the
remaining playing time of the cassette
is briefly shown in the display.
The data of the first TIMER position
then appear in the recorder´s display.
All recorder drive functions are inopera-
tive.
On your TV screen, you see the table
» Ready « with the cassette number,
playing time, and all programmed
TIMER settings.
The programmed recording time is
marked with a yellow line at the tape´s
starting point.
If this mark appears in red and ends
within the playing time display, this
means that an archived recording will
be partially deleted.
If this mark appears in red and goes
beyond the playing time display, this
indicates that the sum of all the pro-
grammed recordings is too large.
The recorder automatically starts recor-
ding at the selected times.
A blue cursor marks the second Timer,
a black cursor
?
is on the first position
of » Prog. «
9. Additional operating steps
or
a) Programme
b) Change/clear
the next
Timer
broadcast
data
Please refer to
the section
“Modifications
and Supple-
menting...” on
the next page.
“
(blue)
“
(green)
uu
. . . . . . . . . . . . . . . . . . . . . . .
0
1
2
3
4
5 h
GRUNDIG
TEXT-PROGRAMMING
■
04 CH 4
11.
19:00
19:50
*
■
❚
-
-
- - .
- - . - -
- - . - -
*
■
■
■
■
■
■
Reserve time :
02:10
Timer
Prog.
Date
Start
Stop
■
: Edit Title
0-9 : Input Prog. – two figures
SAT : Signal source Sat. Receiver
INFO : Return to Info menu
TIMER ACTIVE
Cass N
o
:
001
C 3
0 : 0 0
I
■
Channel 4 News
11.03.
■
■
■
■
■
■
■
■
: Program new recording
■
: Change/delete timer
ON/OFF : Cancel TIMER ACTIVE
6.1 Record Programming
Variant 1
Press these buttons on the
remote control
You will see this on your TV screen
Explanations
10. Programming the next
broadcast
or
a) with VPT
b) manually
The steps for manual program-
ming are described in the second
part of the operating instruc-
tions, pages 15 through 23.
Repeat the ope-
rating steps,
starting at step
1.
Modifications and completions of the recording
data
(necessary for point 9 of the programming example)
Correcting TIMER data
Select the desired timer with the
W
or
Q
button.
Press the
E
or
R
button until the cursor
?
is positioned
at the data to be corrected.
Use the numeric buttons
1
...
0
to » overwrite « this data
and confirm the remaining Timer data with the
O
button.
Now you can programme the next broadcast.
Recording without VPS/PDC
Select the desired timer with the
W
or
Q
button.
Press the
R
button once; the cursor
?
is positioned after
the stop time.
Erase the VPS/PDC with the
“
(blue) button.
The cursor jumps to the first digit of the start time.
If the start time and the VPS/PDC time differ, enter the new
start time with the numeric buttons
1
...
0
and confirm the
remaining data with the
O
button.
Now you can programme the next broadcast.
Doubling the cassette recording time
Select the desired timer with the
W
or
Q
button.
Press the
E
button once; the cursor
?
is positioned after
the stop time.
Select the long-playing mode by pressing the
w
button
(additional indication: » L «), then press the
O
button.
uu
