Traps for SNMP v1/v2 :
Traps are used by the IP Camera to send messages to a management system about important events or status
changes.
- Enable Traps:
Check the box to activate trap reporting.
- Trap address:
Enter the IP address of the management server.
- Trap community:
Enter the community to use when sending a trap message to the management system.
Trap option :
- Warm start:
A Warm start SNMP trap signifies that the SNMP device, i.e. the IP Camera, performs a software reload.
Click the “Save” button to complete the setting.
<UPnP> :
NOTE: The "UPnP" function is also available for the camera model GCI-H0503B (at the bottom of the "Network"
page).
32
English
Summary of Contents for GCI-H0503B
Page 2: ......
