Grundig GCI-H0503B, Owner'S Manual

Page: 19 / 93

Host Name :
The name is for camera identification (max. 30 characters). If the alarm function (see section 9.8. Application) is
enabled and is set to send an alarm message by Mail/FTP, the host name entered here will be displayed in the
alarm message.
Time Zone :
Select the time zone you are in from the drop-down menu.
Enable Daylight Saving Time :
To enable DST, please check the item and then specify the time offset and DST duration. The format for time
offset is [hh:mm:ss]; for instance, if the amount of time offset is one hour, please enter “01:00:00” into the field.
Sync with Computer Time :
After selecting this item, the video date and time display will be synchronised with the PC.
Manual :
The Administrator can set the date, time and day manually. Entry format should be identical with the format
shown next to the enter fields.
Sync with NTP server :
Network Time Protocol (NTP) is an alternative way to synchronise your camera’s clock with a NTP server. Please
specify the server you wish to synchronise the camera with in the enter field. Then select an update interval from
the drop-down menu. For further information about NTP, please see the web site: www.ntp.org.
NOTE: Click on < Save > to confirm the new setting.
9.2. Security
When you click on the category <Security>, there will be a drop-down menu with several tabs including <User>,
<HTTPS>, <IP Filter>, and <IEEE 802.1X>.
NOTE: In the camera model GCI-H0503B, there are no sub-menu tabs under the menu "Security" but only the
password settings.
17 English