<IP Filter> :
When using the IP filter, access to the IP Camera can be restricted by denying/allowing specific IP addresses.
NOTE: The <IP filter> function is not available for GCI-H0503B.
General :
- Enable IP Filter:
Check the box to enable the IP Filter function. Once enabled, access to the IP Camera will be allowed/denied for
the listed IP addresses (IPv4).
Select “Allow” or “Deny” from the drop-down list and click the <Apply> button to determine the IP Filter
behaviour.
- Add/Delete IP Address:
Input the IP address and click the <Add> button to add a new filtered address.
The Filtered IP Addresses list box shows the currently configured IP addresses. Up to 256 IP address entries may
be specified.
To remove an IP address from the list, please select the IP and then click the <Delete> button.
25
English
Summary of Contents for GCI-H0503B
Page 2: ......
