32
Remote advance query
Note
The remote query must have been activated, see the
”Answering machine settings” chapter on page 30.
Using the remote advance query function you can
quickly check – at no cost – whether there are new
messages on your answering machine.
If there are new messages, the answering machine
responds after a maximum of 5 rings.
If there are no new messages, the answering machine
only responds after 8 rings, which means you can
hang up after the 6th ring.
For information on activating this function, see the
”Settings, active after” chapter on page 31.
Remote query
Note:
The remote query must have been activated, see the
”Answering machine settings” chapter on page 31.
You can query and operate the answering machine
from an external telephone connection. If the answer-
ing machine is switched off and the remote query
function activated, the (external) call is taken after 90
seconds. Now you can switch on the answering mach-
ine, after entering the pin, using a remote command.
1
Dial your own number.
– You will hear your announcement.
2
Enter the four-digit PIN using »
1...0
« during the
announcement.
3
After the signal tone, select the function you require
according to the table on page 34 using the nume-
rical buttons.
ANSWERING MACHINE
________________
TAD
Remote query
≥
≤
ON
