Grundig 40VLE630BH, Service Manual

Page: 115 / 180

TP CHASSIS / TELEVISION
115 September 2011
Continue with the setup after these checks.
Later, you should call Digiturk to activate the membership. Please have the password
envelope with you for this call.
After setup is completed, “Digiturk Agreement” that comes with the product will be
filled in. In this agreement, serial number of CI+ module will be entered in the Digiturk
serial no section and serial number of smart card will be entered in the Digikart serial
no section.
Besides, after setup; video and audio should be checked especially in HD (TRT HD,
SHOW HD) and SD channels. In case of broadcasting problems, you should
determine if the problem rests in Digiturk broadcasting or the current installation.
If there is any problem on the installation, broadcasting quality or level;
In case of a problem in signal level (caused by the use of long cable), In-line amplifier
may be attached;
on
headend systems where analog and digital broadcasts (VHF, UHF, IF) are provided
through the same cable, diplexer may be attached to the system as a filter.
If the user has only Turksat 42°-directed dish, it should be set to Eutelsat 7° .
Note: If the customers have inquiries about membership package, broadcasting and
etc, they should be recommended to contact Digiturk.
Against the complaints about Digiturk-enabled TVs’ decoding:
Before reporting error in such issues, please ensure that “Irdeto Access” message
appears in “CA – Module” menu.