Grundig 40VLE630BH, Service Manual

Page: 29 / 180

TP CHASSIS / TELEVISION
29 September 2011
10 Press » « (green) button to make sure that the network connection is established
with the current settings.
– »Testing ... Please wait« message will be displayed and if it is connected
successfully, »Connection to Gateway : Success«, »Internet Connection: Success«
message will be displayed.
11 Press »i« to end the setting.
5.3.5. Wireless Network Connection
Television includes a built-in Wireless WiFi Adapter to connect it to wireless network.
Note: Apart from the built-in WiFi adapter on TV, external USB WiFi adapter can be
connected to »USB1« and »USB2 (HDD)« inputs.
5.3.6. Wireless Network Settings
A In automatic connection, all data regarding connection settings (»IP Address«,
»Netmask «, »Gateway« and »DNS«) are obtained from modem automatically,
except for Access Point Selection.
B In manual connection, all data regarding connection settings (»IP Address«,
»Netmask «, »Gateway« and »DNS«) should be manually configured.
5.3.7. Auto Wireless Network Connection
Most of the home networks are Dynamic networks. If you have a dynamic network,
you must use a DSL modem that supports DHCP. Modems and IP sharers that
support DHCP obtain the »DNS« values required for »IP Address«, »Netmask«,
»Gateway« and internet access automatically, and thus you are not required to enter
those values manually.
1 Open the menu with »i« button.
2 Select »NETWORK APPS« menu with »V« or »
Λ « and confirm with » ● «
»NETWORK APPS« menu will be displayed.
3 Select »Connection Type« option with »V« or »
Λ « and select »Wireless« with »<«
and »>«.
4 Select »Network Configuration« option with »V« or »
Λ « and select »Auto« with »<«
and »>«.
5 Go to »Select Access Point« option with »V« or »
Λ « and confirm with » ● «
– »Select Access Point« menu appears and available wireless networks are scanned
and displayed in the menu.